Силовые модули PM250D Siemens (Сименс) доставка по России со склада и под заказ

The regenerative feedback capability of the PM250D Power Module in generating mode (electronic braking) means that energy is returned to the supply system and not destroyed in a braking resistor. This saves space, time-consuming dimensioning of the braking resistor as well as its wiring. Generated heat is also reduced.

An innovative circuit design reduces supply harmonics. A line reactor is not required. This saves space and costs for engineering and procurement.

The PM250D Power Module is also designed for safety-sensitive applications. In conjunction with a Safety Control Unit, the drive can be turned into a Safety Integrated Drive (see Control Units).

Заказные данные

Заказной №	Вес, кг	Описание	Наличие на складе
6SL3525-0PE17-5AA0	5.7	Sinamics g120d power module pm250d with built in cl. a filter possibility of regeneration 3ac380-480v +10/-10% 47-63hz output high overload: 0, 75kw for 200% 3s, 150% 60s, 100% 300s ambient temp -10 to +40 deg c 210 x 450 x 110 (hxwxd), fsa protection ip65 without control unit	------
6SL3525-0PE17-5AA1	5.7	SINAMICS G120D СИЛОВОЙ МОДУЛЬ PM250D ВСТРОЕННЫЙ ФИЛЬТР КЛАССА А, ВОЗМОЖНА РЕКУПЕРАЦИЯ 3-ФАЗН.380-480 В +10/-10% 47-63 ГЦ ВЫСОКИЙ УРОВЕНЬ ПЕРЕГРУЗКИ: 0,75 КВТ ПРИ 200% 3С,150% 60С,100% 300С ТЕМП. ОКР. СРЕДЫ: ОТ -10 ДО +55 ГРАД. C 210 X 450 X 145 (ВХШХГ), Т	------
6SL3525-0PE21-5AA0	5.7	Sinamics g120d power module pm250d with built in cl. a filter possibility of regeneration 3ac380-480v +10/-10% 47-63hz output high overload: 1, 5kw for 200% 3s, 150% 60s, 100% 300s ambient temp -10 to +40 deg c 210 x 450 x 110 (hxwxd), fsa protection ip65 without control unit	------
6SL3525-0PE21-5AA1	5.7	SINAMICS G120D СИЛОВОЙ МОДУЛЬ PM250D ВСТРОЕННЫЙ ФИЛЬТР КЛАССА А, ВОЗМОЖНА РЕКУПЕРАЦИЯ 3-ФАЗН.380-480 В +10/-10% 47-63 ГЦ ВЫСОКИЙ УРОВЕНЬ ПЕРЕГРУЗКИ: 1,5 КВТ ПРИ 200% 3С,150% 60С,100% 300С ТЕМП. ОКР. СРЕДЫ: ОТ -10 ДО +55 ГРАД. C 210 X 450 X 145 (ВХШХГ), ТИ	------
6SL3525-0PE23-0AA0	8	Sinamics g120d power module pm250d with built in cl. a filter possibility of regeneration 3ac380-480v +10/-10% 47-63hz output high overload: 3, 0kw for 200% 3s, 150% 60s, 100% 300s ambient temp -10 to +40 deg c 210 x 450 x 180 (hxwxd), fsb protection ip65 without control unit	------
6SL3525-0PE23-0AA1	8	SINAMICS G120D СИЛОВОЙ МОДУЛЬ PM250D ВСТРОЕННЫЙ ФИЛЬТР КЛАССА А, ВОЗМОЖНА РЕКУПЕРАЦИЯ 3-ФАЗН.380-480 В +10/-10% 47-63 ГЦ ВЫСОКИЙ УРОВЕНЬ ПЕРЕГРУЗКИ: 3,0 КВТ ПРИ 200% 3С,150% 60С,100% 300С ТЕМП. ОКР. СРЕДЫ: ОТ -10 ДО +55 ГРАД. C 210 X 450 X 145 (ВХШХГ), ТИ	------
6SL3525-0PE24-0AA0	8.5	Sinamics g120d power module pm250d with built in cl. a filter possibility of regeneration 3ac380-480v +10/-10% 47-63hz output high overload: 4, 0kw for 200% 3s, 150% 60s, 100% 300s ambient temp -10 to +40 deg c 210 x 450 x 220 (hxwxd), fsc protection ip65 without control unit	------
6SL3525-0PE24-0AA1	8.5	SINAMICS G120D СИЛОВОЙ МОДУЛЬ PM250D ВСТРОЕННЫЙ ФИЛЬТР КЛАССА А, ВОЗМОЖНА РЕКУПЕРАЦИЯ 3-ФАЗН.380-480 В +10/-10% 47-63 ГЦ ВЫСОКИЙ УРОВЕНЬ ПЕРЕГРУЗКИ: 4,0 КВТ ПРИ 200% 3С,150% 60С,100% 300С ТЕМП. ОКР. СРЕДЫ: ОТ -10 ДО +55 ГРАД. C 210 X 450 X 145 (ВХШХГ), ТИ	------
6SL3525-0PE25-5AA0	8.5	Sinamics g120d power module pm250d with built in cl. a filter possibility of regeneration 3ac380-480v +10/-10% 47-63hz output high overload: 5, 5kw for 200% 3s, 150% 60s, 100% 300s ambient temp -10 to +40 deg c 210 x 450 x 220 (hxwxd), fsc protection ip65 without control unit	------
6SL3525-0PE25-5AA1	8.5	SINAMICS G120D СИЛОВОЙ МОДУЛЬ PM250D ВСТРОЕННЫЙ ФИЛЬТР КЛАССА А, ВОЗМОЖНА РЕКУПЕРАЦИЯ 3-ФАЗН.380-480 В +10/-10% 47-63 ГЦ ВЫСОКИЙ УРОВЕНЬ ПЕРЕГРУЗКИ: 5,5 КВТ ПРИ 200% 3С,150% 60С,100% 300С ТЕМП. ОКР. СРЕДЫ: ОТ -10 ДО +55 ГРАД. C 210 X 450 X 145 (ВХШХГ), ТИ	------
6SL3525-0PE27-5AA0	8.5	Sinamics g120d power module pm250d with built in cl. a filter possibility of regeneration 3ac380-480v +10/-10% 47-63hz output high overload: 7, 5kw for 200% 3s, 150% 60s, 100% 300s ambient temp -10 to +40 deg c 210 x 450 x 220 (hxwxd), fsc protection ip65 without control unit	------
6SL3525-0PE27-5AA1	8.5	SINAMICS G120D СИЛОВОЙ МОДУЛЬ PM250D ВСТРОЕННЫЙ ФИЛЬТР КЛАССА А, ВОЗМОЖНА РЕКУПЕРАЦИЯ 3-ФАЗН.380-480 В +10/-10% 47-63 ГЦ ВЫСОКИЙ УРОВЕНЬ ПЕРЕГРУЗКИ: 7,5 КВТ ПРИ 200% 3С,150% 60С,100% 300С ТЕМП. ОКР. СРЕДЫ: ОТ -10 ДО +55 ГРАД. C 210 X 450 X 145 (ВХШХГ), ТИ	------

Аксессуары

Заказной №	Вес, кг	Описание	Наличие на складе
3RK1911-0DB13	0.59	Energy connection cable single-sided, open on one side Han Q4/2 angled 4 x 4 mm2 Length 1.5 m	------
3RK1911-0DB33	1.8	Energy connection cable single-sided, open on one side Han Q4/2 angled 4 x 4 mm2 Length 5 m	------
3RK1911-2BE10	2	Socket insert Han Q4/2 5 contact sockets 4 mm2, 2 auxiliary contacts 0.5 mm2 pin 11+12 Connector set power supply for connection to MS, RSM of ET200pro, M200D Sleeve housing angled Outgoing unit including screw connection	------
3RK1911-2BE30	2	Socket insert Han Q4/2 5 contact sockets 6 mm2, 2 auxiliary contacts 0.5 mm2 pin 11+12 Connector set power supply for connection to MS, RSM of ET200pro, M200D Sleeve housing angled Outgoing unit including screw connection	------
3RK1911-2BE50	2	Socket insert Han Q4/2 5 contact sockets 2.5 mm2, 2 auxiliary contacts 0.5 mm2 pin 11+12 Connector set power supply for connection to MS, RSM of ET200pro, M200D Sleeve housing angled Outgoing unit including screw connection	------
6ES7194-1AB01-0XA0	0.228	SIMATIC DP, ET200X, СОЕДИНИТЕЛЬ HANQ8 ДЛЯ ПОДКЛЮЧЕНИЯ ДВИГАТЕЛЯ К ПРЕОБРАЗОВАТЕЛЮ ЧАСТОТЫ, DESINA-СОВМЕСТИМЫЙ	------

Тех. данные

Интеграция

PM250D Power Modules communicate with the Control Unit via the PM-IF interface.

PM250D Power Modules feature the following interfaces as standard:

PM‑IF interface for connection of the PM250D Power Module and Control Unit.
Motor is connected through HAN Q8 (male) including activation of the holding brake and temperature sensor
Network is connected through HAN Q4/2 (female)

Connection diagram for PM250D Power Module with integrated line filter class A

Технические данные

General technical data

	PM250D Power Modules
Line operating voltage	3 AC 380 to 480 V ±10%
Line requirements Line short circuit voltage u_k	≤ 1%
input frequency	47 to 63 Hz
Output frequency
Control type V/f	0 to 650 Hz
Control type Vector	0 to 200 Hz
Pulse frequency	4 kHz (standard), for higher pulse frequencies, see derating data
Power factor	0.95
Inverter efficiency	95 … 97%
Control factor	87%
Overload capability
High overload (HO)	Average maximum rated output current during a cycle time of 300 s 1.5 × rated output current (i.e. 150 % overload) over 60 s at a cycle time of 300 s 2 × rated output current (i.e. 200% overload) over 3 s at a cycle time of 300 s
Electromagnetic Compatibility	Integrated line filter class A according to EN 55011
Possible braking methods	Regenerative feedback in generating mode; integrated braking signal 180 V DC (corresponds to 1 AC 400 V rectified)
Degree of protection	IP65
Operating temperature
with standard Control Unit	-10 ... +40 °C (14 ... 104 °F) without derating, > 40 ... 55 °C, see derating characteristics
with fail-safe Control Unit	0 ... 40 °C (32 ... 104 °F)
Storage temperature	-40 ... +70 °C (-40 ... +158 °F)
Permitted mounting position	Wall mounting and free-standing
Relative humidity	< 95% RH, non-condensing
Cooling	FSA and FSB: Convection FSC: Air cooling as required through built-in fan
Installation altitude	Up to 1000 m above sea level without derating, > 1000 m see derating characteristics
Standard SCCR (Short Circuit Current Rating) ¹⁾	10 kA
Protective functions	Undervoltage Overvoltage Overload Ground fault Short-circuit Stall prevention Motor blocking protection Motor overtemperature Inverter overtemperature Parameter interlock
Standards conformance	UL, cUL, CE, c-tick
CE mark	To Low-Voltage Directive 73/23/EEC and Machinery Directive 98/37/EEC

¹⁾ Applies to industrial control cabinet installations to NEC article 409/UL 508A. For further information, visit us on the Internet at:

http://support.automation.siemens.com/WW/view/en/23995621

		PM250D Power Modules
Line voltage 3 AC 380 to 480 V		6SL3525-0PE17‑5AA0	6SL3525-0PE21‑5AA0	6SL3525-0PE23‑0AA0
Rated output current I_rated¹⁾	A	2.2	4.1	7.7
Output current I_max	A	4.4	8.2	15.4
Rated power	kW	0.75	1.5	3
Rated pulse frequency	kHz	4	4	4
Efficiency η		0.97	0.97	0.97
Power loss	kW	0.047	0.061	0.103
Cooling air requirement	m³/s	0.004	0.005	0.009
Sound pressure level	dB(A)	–	–	–
Rated input current ²⁾	A	2.1	3.8	7.2
Line supply connection U1/L1, V1/L2, W1/L3, PE		HAN Q4/2 (male)	HAN Q4/2 (male)	HAN Q4/2 (male)
Conductor cross-section	mm²	1.5 … 6	1.5 … 6	2.5 … 6
Motor connection U2, V2, W2, PE, brake, temperature sensor		HAN Q8 (female)	HAN Q8 (female)	HAN Q8 (female)
Conductor cross-section	mm²	1 … 4	1 … 4	2.5 … 4
Motor cable length, max.	m	15	15	15
Degree of protection		IP65	IP65	IP65
Dimensions
Width	mm	450	450	450
Height	mm	210	210	210
Depth	mm	110	110	180
Frame size		FSA	FSA	FSB
Weight, approx.	kg	5.7	5.7	8

¹⁾ The rated output current I_rated is based on the loading for high overload (high overload HO).

²⁾ The input current depends on the motor load and line impedance. The input currents apply for rated power loading for a line impedance corresponding to u_k = 1%.

		PM250D Power Modules
Line voltage 3 AC 380 to 480 V		6SL3525-0PE24‑0AA0	6SL3525-0PE25‑5AA0	6SL3525-0PE27‑5AA0
Rated output current I_rated¹⁾	A	10.2	13.2	19
Output current I_max	A	20.4	26.4	38
Rated power	kW	4	5.5	7.5
Rated pulse frequency	kHz	4	4	4
Efficiency η		0.97	0.97	0.97
Power loss	kW	0.141	0.209	0.295
Cooling air requirement	m³/s	0.012	0.018	0.025
Sound pressure level	dB(A)	74.5	74.5	74.5
Rated input current ²⁾	A	9.5	12.2	17.7
Line supply connection U1/L1, V1/L2, W1/L3, PE		HAN Q4/2 (male)	HAN Q4/2 (male)	HAN Q4/2 (male)
Conductor cross-section	mm²	2.5 … 6	4 … 6	4 … 6
Motor connection U2, V2, W2, PE, brake, temperature sensor		HAN Q8 (female)	HAN Q8 (female)	HAN Q8 (female)
Conductor cross-section	mm²	2.5 … 4	4	4
Motor cable length, max.	m	15	15	15
Degree of protection		IP65	IP65	IP65
Dimensions
Width	mm	450	450	450
Height	mm	210	210	210
Depth	mm	220	220	220
Frame size		FSC	FSC	FSC
Weight, approx.	kg	8.5	8.5	8.5

¹⁾ The rated output current I_rated is based on the loading for high overload (high overload HO).

²⁾ The input current depends on the motor load and line impedance. The input currents apply for rated power loading for a line impedance corresponding to u_k = 1%.

Дополнительно

Connector sets for the line supply

	Order No.
Connector set for Han Q4/2 power supply
2.5 mm²	3RK1911-2BE50
4 mm²	3RK1911-2BE10
6 mm²	3RK1911-2BE30

Pre-assembled motor cables and connector set for the connection between the Power Module and the motor

	Order No.
Pre-assembled motor cable, with HAN Q8 connector on one end, shielded
1.5 m long	6ES7194-1LA01-0AA0
3 m long	6ES7194-1LB01-0AA0
5 m long	6ES7194-1LC01-0AA0
10 m long	6ES7194-1LD01-0AA0
Connector set for motor cable, shielded, HAN Q8	6ES7194-1AB01-0XA0

Характеристика

Derating data

Pulse frequency

Rated output at 3 AC 400 V		Rated output current in A at a switching frequency of
kW	hp	4 kHz	6 kHz	8 kHz	10 kHz	12 kHz	14 kHz	16 kHz
0.75	1.0	2.2	1.9	1.5	1.3	1.1	1.0	0.9
1.5	2.0	4.1	3.5	2.9	2.5	2.1	1.8	1.6
3.0	4.0	7.7	6.5	5.4	4.6	3.9	3.5	3.1
4.0	5.0	10.2	8.7	7.1	6.1	5.1	4.6	4.1
5.5	7.5	13.2	11.2	9.2	7.9	6.6	5.9	5.3
7.5	10	19	16.2	13.3	11.4	9.5	8.6	7.6