|
Обзор
Обзор
Configuration options with SIMATIC PDM
SIMATIC PDM (Process Device Manager) is a universal, vendor-independent tool for the configuration, parameterization, commissioning, diagnostics and servicing of intelligent field devices (sensors and actuators) and field components (remote I/Os, multiplexers, control-room devices, compact controllers), which in the following sections will be referred to simply as devices.
Using one software, SIMATIC PDM enables the processing of more than 1200 devices from Siemens and over 100 vendors worldwide on one homogeneous user interface. Parameters and functions for all supported devices are displayed in a consistent and uniform fashion independent of their communications interface.
From the viewpoint of device integration, SIMATIC PDM is the most powerful open device manager available in the world. Devices which previously were not supported can be easily integrated in SIMATIC PDM at any time by importing their device descriptions (EDD). This provides security for your investment and saves you investment costs, training expenses and consequential costs.
SIMATIC PDM is integrated in the asset management of SIMATIC PCS 7. The Process Device Manager provides wider information for all devices described by the Electronic Device Description (EDD), e.g. detailed diagnostics information (vendor information, information on fault diagnostics and troubleshooting, further documentation), modification logbook (audit trial), parameter information. It is possible to change directly to SIMATIC PDM from the diagnostics faceplates in the maintenance station.
Заказные данные
Заказной № |
Вес, кг |
Описание |
Наличие на складе |
Заказать |
6ES7651-5CX06-0YE5 |
0.281 |
Simatic pdm, пакет для конфигурирования интеллектуальных устройств, пакет обновления прогр. обеспечения от pdm v5. x до pdm v6. 0, плавающая лицензия для 1 пользователя, инжен. прогр. обеспечение, прогр. обесп. и докум. на cd, ключ лицензии на fd, класс а, 5 |
------ |
|
6ES7658-3AB28-0YA5 |
0.1 |
SIMATIC PDM, ИНЖЕНЕРНОЕ ПО ДЛЯ РАБОТЫ С ПОЛЕВЫМИ УСТРОЙСТВАМИ ВЕРСИИ BASIC V8.2 (4 ТЕГА/УСТРОЙСТВА), ПЛАВАЮЩАЯ ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИНЖЕНЕРНОЕ ПО, ПО И ДОК. НА DVD, ЛИЦЕНЗИОННЫЙ КЛЮЧ НА USB-НАКОПИТЕЛЕ, CLASS A, 6 ЯЗЫКОВ (G, E, F, I, S, C), РАБОТА ПОД ОС WIN7ULT/SERVER 2008 R2, ЦЕЛЕВОЕ АПП. ОБЕСП.: PG/PC |
------ |
|
6ES7658-3AX06-0YA5 |
0.257 |
Simatic pdm, пакет для конфигурирования интеллектуальных устройств, базовое программное обеспечение v6. 0 (4 переменных), плавающая лицензия для 1 пользователя, инжен. прогр. обеспечение, прогр. обесп. и докум. на cd, ключ лицензии на fd, класс а, 5 языков |
------ |
|
6ES7658-3AX06-0YA6 |
0.256 |
Simatic pdm, пакет для конфигурирования интеллектуальных устройств, базовое программное обеспечение версии 6 (4 переменных), ограниченная лицензия на 50 часов, инжен. прогр. обеспечение, прогр. обесп. и докум. на cd, ключ лицензии на fd, класс а, 5 языков |
------ |
|
6ES7658-3BX28-2YB5 |
0.1 |
SIMATIC PDM, ОПЦИОНАЛЬНЫЙ ПАКЕТ ДЛЯ ИНТЕГРАЦИИ SIMATIC PDM V8.2 В СРЕДУ STEP7/PCS7, ПЛАВАЮЩАЯ ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИНЖЕНЕРНОЕ ПО, БЕЗ ПО И ДОК. ЛИЦЕНЗИОННЫЙ КЛЮЧ НА USB-НАКОПИТЕЛЕ, CLASS A, 6 ЯЗЫКОВ (G, E, F, I, S, C), РАБОТА ПОД ОС XPPROF/ WIN7ULT/SERVER 2008 R2 WIN7ULT/SERVER 2008 R2, ЦЕЛЕВОЕ АПП. ОБЕСП.: PG/PC |
------ |
|
6ES7658-3CX28-2YB5 |
0.1 |
SIMATIC PDM, ОПЦИОНАЛЬНЫЙ ПАКЕТ ROUTING V8.2 ДЛЯ ПОДДЕРЖКИ ФУНКЦИИ МАРШРУТИЗАЦИИ ДЛЯ SIMATIC PDM V8.2, ПЛАВАЮЩАЯ ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИНЖЕНЕРНОЕ ПО, БЕЗ ПО И ДОК., ЛИЦЕНЗИОННЫЙ КЛЮЧ НА USB-НАКОПИТЕЛЕ, CLASS A, 6 ЯЗЫКОВ (G, E, F, I, S, C), РАБОТА ПОД ОС WIN7ULT/SERVER 2008 R2, ЦЕЛЕВОЕ АПП. ОБЕСП.: PG/PC |
------ |
|
6ES7658-3EX28-2YB5 |
0.1 |
SIMATIC PDM, ОПЦИОНАЛЬНЫЙ ПАКЕТ HART SERVER V8.2 ДЛЯ СВЯЗИ ЧЕРЕЗ HART-МУЛЬТИПЛЕКСОР ДЛЯ SIMATIC PDM V8.2, ПЛАВАЮЩАЯ ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИНЖЕНЕРНОЕ ПО, БЕЗ ПО И ДОК., ЛИЦЕНЗИОННЫЙ КЛЮЧ НА USB-НАКОПИТЕЛЕ, CLASS A, 6 ЯЗЫКОВ (G, E, F, I, S, C), РАБОТА ПОД ОС WIN7ULT/SERVER 2008 R2, ЦЕЛЕВОЕ АПП. ОБЕСП.: PG/PC |
------ |
|
6ES7658-3GX06-0YC8 |
0.115 |
Simatic pdm, пакет для конфигурирования интеллектуальных устройств, демо-версия 6. 0, на cdrom, связь и сохранение невозможны |
------ |
|
6ES7658-3GX28-0YT8 |
0.1 |
SIMATIC PDM, ИНЖЕНЕРНОЕ ПО ДЛЯ РАБОТЫ С ПОЛЕВЫМИ УСТРОЙСТВАМИ ВЕРСИИ MEDIA PACKAGE V8.2, НОСИТЕЛЬ ДАННЫХ БЕЗ ЛИЦЕНЗИИ, БЕЗ ГАРАНТИЙ И ОТВЕТСТВЕННОСТИ, С ОГРАНИЧЕННЫМ ФУНКЦИОНАЛОМ (СМ. ИНФОРМАЦИЮ О ПРОДУКТЕ), ПО НА DVD, БЕЗ ДОКУМЕНТАЦИИ, 6 ЯЗЫКОВ (G, E, F, I, S, C), РАБОТА ПОД ОС WIN7ULT/SERVER 2008 R2, ЦЕЛЕВОЕ АПП. ОБЕСП.: PG/PC |
------ |
|
6ES7658-3HA28-0YA5 |
0.1 |
SIMATIC PDM, ИНЖЕНЕРНОЕ ПО ДЛЯ РАБОТЫ С ПОЛЕВЫМИ УСТРОЙСТВАМИ ВЕРСИИ SINGLE POINT V8.2 (1 ТЕГ/УСТРОЙСТВО), ПЛАВАЮЩАЯ ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИНЖЕНЕРНОЕ ПО, ПО И ДОК. НА DVD, ЛИЦЕНЗИОННЫЙ КЛЮЧ НА USB-НАКОПИТЕЛЕ, CLASS A, 6 ЯЗЫКОВ (G, E, F, I, S, C), РАБОТА ПОД ОС WIN7ULT/SERVER 2008 R2, ЦЕЛЕВОЕ АПП. ОБЕСП.: PG/PC |
------ |
|
6ES7658-3HX06-0YA5 |
0.254 |
Simatic pdm, пакет для конфигурирования интеллектуальных устройств версии 6. 0 на одну точку (1 переменная), плавающая лицензия для 1 пользователя, инжен. прогр. обеспечение, прогр. обесп. и докум. на cd, ключ лицензии на fd, класс а, 5 языков (анг/нем/фран |
------ |
|
6ES7658-3JD28-0YA5 |
0.1 |
SIMATIC PDM, ИНЖЕНЕРНОЕ ПО ДЛЯ РАБОТЫ С ПОЛЕВЫМИ УСТРОЙСТВАМИ ВЕРСИИ SERVICE V8.2 (100 ТЕГОВ/УСТРОЙСТВ), ПЛАВАЮЩАЯ ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИНЖЕНЕРНОЕ ПО, ПО И ДОК. НА DVD, ЛИЦЕНЗИОННЫЙ КЛЮЧ НА USB-НАКОПИТЕЛЕ, CLASS A, 6 ЯЗЫКОВ (G, E, F, I, S, C), РАБОТА ПОД ОС WIN7ULT/SERVER 2008 R2, ЦЕЛЕВОЕ АПП. ОБЕСП.: PG/PC |
------ |
|
6ES7658-3JX06-0YA5 |
0.257 |
Simatic pdm, пакет для конфигурирования интеллектуальных устройств версии 6. 0, на 128 переменных, плавающая лицензия для 1 пользователя, инжен. прогр. обеспечение, прогр. обесп. и докум. на cd, ключ лицензии на fd, класс а, 5 языков (анг/нем/франц/исп/итал |
------ |
|
6ES7658-3KD28-0YA5 |
0.1 |
SIMATIC PDM, ИНЖЕНЕРНОЕ ПО ДЛЯ РАБОТЫ С ПОЛЕВЫМИ УСТРОЙСТВАМИ ВЕРСИИ S7 V8.2 (100 ТЕГОВ/УСТРОЙСТВ), ПЛАВАЮЩАЯ ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИНЖЕНЕРНОЕ ПО, ПО И ДОК. НА DVD, ЛИЦЕНЗИОННЫЙ КЛЮЧ НА USB-НАКОПИТЕЛЕ, CLASS A, 6 ЯЗЫКОВ (G, E, F, I, S, C), РАБОТА ПОД ОС WIN7ULT/SERVER 2008 R2, ЦЕЛЕВОЕ АПП. ОБЕСП.: PG/PC |
------ |
|
6ES7658-3KX06-0YA5 |
0.256 |
Simatic pdm, пакет для конфигурирования интеллектуальных устройств версии 6. 0 для s7 на 128 переменных, плавающая лицензия для 1 пользователя, инжен. прогр. обеспечение, прогр. обесп. и докум. на cd, ключ лицензии на fd, класс а, 5 языков (анг/нем/франц/ис |
------ |
|
6ES7658-3LD28-0YA5 |
0.1 |
SIMATIC PDM, ИНЖЕНЕРНОЕ ПО ДЛЯ РАБОТЫ С ПОЛЕВЫМИ УСТРОЙСТВАМИ ВЕРСИИ PCS 7 V8.2 (100 ТЕГОВ/УСТРОЙСТВ), ПЛАВАЮЩАЯ ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИНЖЕНЕРНОЕ ПО, ПО И ДОК. НА DVD, ЛИЦЕНЗИОННЫЙ КЛЮЧ НА USB-НАКОПИТЕЛЕ, CLASS A, 6 ЯЗЫКОВ (G, E, F, I, S, C), РАБОТА ПОД ОС WIN7ULT/SERVER 2008 R2, ЦЕЛЕВОЕ АПП. ОБЕСП.: PG/PC |
------ |
|
6ES7658-3LX06-0YA5 |
0.257 |
Simatic pdm, пакет для конфигурирования интеллектуальных устройств версии 6. 0 для pcs 7 на 128 переменных, плавающая лицензия для 1 пользователя, инжен. прогр. обеспечение, прогр. обесп. и докум. на cd, ключ лицензии на fd, класс а, 5 языков (анг/нем/франц |
------ |
|
6ES7658-3MD28-0YA5 |
0.1 |
SIMATIC PDM, ИНЖЕНЕРНОЕ ПО ДЛЯ РАБОТЫ С ПОЛЕВЫМИ УСТРОЙСТВАМИ ВЕРСИИ PCS 7 - FF V8.2 (100 ТЕГОВ/УСТРОЙСТВ), ПЛАВАЮЩАЯ ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИНЖЕНЕРНОЕ ПО, ПО И ДОК. НА DVD, ЛИЦЕНЗИОННЫЙ КЛЮЧ НА USB-НАКОПИТЕЛЕ, CLASS A, 6 ЯЗЫКОВ (G, E, F, I, S, C), РАБОТА ПОД ОС WIN7ULT/SERVER 2008 R2, ЦЕЛЕВОЕ АПП. ОБЕСП.: PG/PC |
------ |
|
6ES7658-3NX28-2YB5 |
0.1 |
SIMATIC PDM, ОПЦИОНАЛЬНЫЙ ПАКЕТ EXTENDED V8.2 ДЛЯ РАСШИРЕНИЯ ФУНКЦИЙ SIMATIC PDM V8.2, ПЛАВАЮЩАЯ ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИНЖЕНЕРНОЕ ПО, БЕЗ ПО И ДОК., ЛИЦЕНЗИОННЫЙ КЛЮЧ НА USB-НАКОПИТЕЛЕ, CLASS A, 6 ЯЗЫКОВ (G, E, F, I, S, C), РАБОТА ПОД ОС WIN7ULT/SERVER 2008 R2, ЦЕЛЕВОЕ АПП. ОБЕСП.: PG/PC |
------ |
|
6ES7658-3QX28-2YB5 |
0.1 |
SIMATIC PDM, ОПЦИОНАЛЬНЫЙ ПАКЕТ COMMUNICATION FOUNDATION FIELDBUS V8.2 ДЛЯ SIMATIC PDM PCS 7 V8.2, ПЛАВАЮЩАЯ ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИНЖЕНЕРНОЕ ПО, БЕЗ ПО И ДОК., ЛИЦЕНЗИОННЫЙ КЛЮЧ НА USB-НАКОПИТЕЛЕ, CLASS A, 6 ЯЗЫКОВ (G, E, F, I, S, C), РАБОТА ПОД ОС WIN7ULT/SERVER 2008 R2, ЦЕЛЕВОЕ АПП. ОБЕСП.: PG/PC |
------ |
|
6ES7658-3SX28-2YB5 |
0.1 |
SIMATIC PDM, ОПЦИОНАЛЬНЫЙ ПАКЕТ COMMAND INTERFACE V8.2 ДЛЯ УДАЛЁННОЙ РАБОТЫ С SIMATIC PDM BASIC/SERVICE V8.2, ПЛАВАЮЩАЯ ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИНЖЕНЕРНОЕ ПО, БЕЗ ПО И ДОК., ЛИЦЕНЗИОННЫЙ КЛЮЧ НА USB-НАКОПИТЕЛЕ, CLASS A, 6 ЯЗЫКОВ (G, E, F, I, S, C), РАБОТА ПОД ОС WIN7ULT/SERVER 2008 R2, ЦЕЛЕВОЕ АПП. ОБЕСП.: PG/PC |
------ |
|
6ES7658-3TD28-0YA5 |
0.1 |
SIMATIC PDM, ИНЖЕНЕРНОЕ ПО ДЛЯ РАБОТЫ С ПОЛЕВЫМИ УСТРОЙСТВАМИ ВЕРСИИ PCS 7 - SERVER V8.2 (100 ТЕГОВ/УСТРОЙСТВ), ПЛАВАЮЩАЯ ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИНЖЕНЕРНОЕ ПО, ПО И ДОК. НА DVD, ЛИЦЕНЗИОННЫЙ КЛЮЧ НА USB-НАКОПИТЕЛЕ, CLASS A, 6 ЯЗЫКОВ (G, E, F, I, S, C), РАБОТА ПОД ОС WIN7ULT/SERVER 2008 R2, ЦЕЛЕВОЕ АПП. ОБЕСП.: PG/PC |
------ |
|
6ES7658-3TX28-2YB5 |
0.1 |
SIMATIC PDM, ОПЦИОНАЛЬНЫЙ ПАКЕТ SERVER V8.2 ДЛЯ РАБОТЫ С HART-УСТРОЙСТВАМИ ЧЕРЕЗ МУЛЬТИПЛЕКСОРЫ, ВКЛЮЧАЯ WIRELESSHART, ПЛАВАЮЩАЯ ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ИНЖЕНЕРНОЕ ПО, БЕЗ ПО И ДОК., ЛИЦЕНЗИОННЫЙ КЛЮЧ НА USB-НАКОПИТЕЛЕ, CLASS A, 6 ЯЗЫКОВ (G, E, F, I, S, C), РАБОТА ПОД ОС WIN7ULT/SERVER 2008 R2, ЦЕЛЕВОЕ АПП. ОБЕСП.: PG/PC |
------ |
|
6ES7658-3XC00-2YB5 |
0.142 |
SIMATIC PDM, ПАКЕТ ПО 10 ТЕГОВ, ПЛАВАЮЩАЯ ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ПО РАЗРАБОТКИ, БЕЗ ПО И ДОК., ЛИЦ. КЛЮЧ НА USB, CLASS A, REFERENCE HW: PC/PG |
------ |
|
6ES7658-3XD00-2YB5 |
0.137 |
SIMATIC PDM, ПАКЕТ ПО 100 ТЕГОВ, ПЛАВАЮЩАЯ ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ПО РАЗРАБОТКИ, БЕЗ ПО И ДОК., ЛИЦ. КЛЮЧ НА USB, CLASS A, REFERENCE HW: PC/PG |
------ |
|
6ES7658-3XE00-2YB5 |
0.15 |
SIMATIC PDM, ПАКЕТ ПО 1000 ТЕГОВ, ПЛАВАЮЩАЯ ЛИЦЕНЗИЯ НА 1 ПОЛЬЗОВАТЕЛЯ, ПО РАЗРАБОТКИ, БЕЗ ПО И ДОК., ЛИЦ. КЛЮЧ НА USB, CLASS A, REFERENCE HW: PC/PG |
------ |
|
6ES7658-3XX00-0YL8 |
0.25 |
Simatic pdm, сервис обновления программного обеспечения с автоматической рассылкой новых версий в течение 1 года |
------ |
|
Аксессуары
Заказной № |
Вес, кг |
Описание |
Наличие на складе |
Заказать |
6ES7658-3BX06-2YB5 |
0.241 |
Simatic pdm, пакет для конфигурирования интеллектуальных устройств интегрированный в step7/pcs7 v 6. 0, плавающая лицензия для 1 пользователя, инжен. прогр. обеспечение, без прогр. обесп. и докум. , ключ лицензии на fd, класс а, 5 языков (анг/нем/франц/исп/и |
------ |
|
6ES7658-3CX06-2YB5 |
0.241 |
Simatic pdm, пакет для конфигурирования интеллектуальных устройств с поддержкой роутинга через s7-400, плавающая лицензия для 1 пользователя, инжен. прогр. обеспечение, без прогр. обесп. и докум. , ключ лицензии на fd, класс а, 5 языков (анг/нем/франц/исп/и |
------ |
|
6ES7658-3EX06-2YB5 |
0.241 |
Simatic pdm, пакет для конфигурирования интеллектуальных устройств с поддержкой связи через стандартный hart-мультиплексор, плавающая лицензия для 1 пользователя, инжен. прогр. обеспечение, без прогр. обесп. и докум. , ключ лицензии на fd, класс а, 5 языков |
------ |
|
6ES7658-3XA06-2YB5 |
0.241 |
Simatic pdm, пакет для конфигурирования интеллектуальных устройств, увеличения числа переменных до 128, плавающая лицензия для 1 пользователя, инжен. прогр. обеспечение, без прогр. обесп. и докум. , ключ лицензии на fd, класс а, 5 языков (анг/нем/франц/исп/ |
------ |
|
6ES7658-3XB06-2YB5 |
0.241 |
Simatic pdm, пакет для конфигурирования интеллектуальных устройств версии 6. 0, увеличение числа переменных до 512, плавающая лицензия для 1 пользователя, инжен. прогр. обеспечение, без прогр. обесп. и докум. , ключ лицензии на fd, класс а, 5 языков (анг/нем |
------ |
|
6ES7658-3XB06-2YD5 |
0.112 |
Simatic pdm, пакет для конфигурирования интеллектуальных устройств версии 6. 0, увеличение числа переменных со 128 до 512, плавающая лицензия для 1 пользователя, инжен. прогр. обеспечение, без прогр. обесп. и докум. , ключ лицензии на fd, класс а, 5 языков ( |
------ |
|
6ES7658-3XC06-2YB5 |
0.241 |
Simatic pdm, пакет для конфигурирования интеллектуальных устройств версии 6. 0, увеличение числа переменных до 1024, плавающая лицензия для 1 пользователя, инжен. прогр. обеспечение, без прогр. обесп. и докум. , ключ лицензии на fd, класс а, 5 языков (анг/не |
------ |
|
6ES7658-3XC06-2YD5 |
0.114 |
Simatic pdm, пакет для конфигурирования интеллектуальных устройств версии 6. 0, увеличение числа переменных с 512 до 1024, плавающая лицензия для 1 пользователя, инжен. прогр. обеспечение, без прогр. обесп. и докум. , ключ лицензии на fd, класс а, 5 языков ( |
------ |
|
6ES7658-3XD06-2YB5 |
0.241 |
Simatic pdm, пакет для конфигурирования интеллектуальных устройств версии 6. 0, увеличение числа переменных до 2048, плавающая лицензия для 1 пользователя, инжен. прогр. обеспечение, без прогр. обесп. и докум. , ключ лицензии на fd, класс а, 5 языков (анг/не |
------ |
|
6ES7658-3XD06-2YD5 |
0.241 |
Simatic pdm, пакет для конфигурирования интеллектуальных устройств версии 6. 0, увеличение числа переменных с 1024 до 2048, плавающая лицензия для 1 пользователя, инжен. прогр. обеспечение, без прогр. обесп. и докум. , ключ лицензии на fd, класс а, 5 языков |
------ |
|
6ES7658-3XH06-2YD5 |
0.241 |
Simatic pdm, software powerpack from 2048 to unlimited tags плавающая лицензия для 1 пользователя, инжен. прогр. обеспечение, без прогр. обесп. и докум. , ключ лицензии на fd, класс а, 5 языков (анг/нем/франц/исп/итал. ), работа под win2000prof/ xpprof refer |
------ |
|
Тех. данные
Дизайн
Customer-oriented product structure
The SIMATIC PDM Process Device Manager can be used in a versatile manner in the context of Totally Integrated Automation (TIA). Use in the engineering system of SIMATIC PCS 7 is one possible application.
The customer-oriented products structure of SIMATIC PDM supports you in adaptation of the scope of functions and performance to your individual requirements. You can select the minimum configuration SIMATIC PDM Single Point, one of the application-specific, predefined product configurations SIMATIC PDM Service, SIMATIC PDM PCS 7 or SIMATIC PDM S7, or produce your desired configuration from the individual components offered (see table).
The selection depends on the application range and environment of use:
- System-integrated in a SIMATIC PCS 7/S7 configuration environment:
- SIMATIC PDM PCS 7 (for integration in an engineering system for SIMATIC PCS 7)
- SIMATIC PDM S7 (for integration in a SIMATIC S7 configuration environment)
- SIMATIC PDM stand-alone as service tool for operation on a mobile computer on the PROFIBUS or with direct connection to the device:
- SIMATIC PDM Single Point (for processing of a single field device via a point-to-point coupling)
- SIMATIC PDM Service (for enhanced servicing, including modification logbook and lifelist detailed diagnostics)
|
SIMATIC PDM stand-alone
|
SIMATIC PDM system-integrated
|
|
Minimum configuration
|
Components for individual configuration
|
Predefined product configurations
|
Product name
|
SIMATIC PDM Single Point
|
SIMATIC PDM Basic
|
SIMATIC PDM Service
|
SIMATIC PDM S7
|
SIMATIC PDM PCS 7
|
TAGs included in scope of delivery
|
1
|
4
|
128
|
128
|
128
|
TAG expansions
|
Cannot be expanded
|
TAG options
- 128 TAGs
- 512 TAGs
- 1024 TAGs
- 2048 TAGs
and/or PowerPacks
|
PowerPacks
- From 128 to 512 TAGs
- From 512 to 1024 TAGs
- From 1024 to 2048 TAGs
- From 2048 to unlimited TAGs
|
Option "Integration in STEP 7/PCS 7"
|
×
|
×
|
✓
|
✓
|
Option "Routing through S7‑400"
|
×
|
×
|
×
|
✓
|
Option "Communication via standard HART multiplexer"
|
×
|
×
|
×
|
×
|
✓: Components included in delivery of individual PDM configurations
×: Can be ordered as options
Note: For definition of TAG, see under TAG options/PowerPacks.
Minimum configuration SIMATIC PDM Single Point
This low-cost minimum configuration with handheld functionality is tailored to processing exactly one field device via a point-to-point coupling. All device functions are supported as defined in the device description. These functions include:
- Unlimited selection of devices / management of device catalog
- Communication via PROFIBUS DP/PA or HART modem
- Parameterization and diagnostics in accordance with the device description
- Exporting and importing of parameter data
- Device identification
- Lifelist
The following system functions of SIMATIC PDM Basic are not available with SIMATIC PDM Single Point:
- EDD-based diagnostics in the lifelist
- Project editing
- Storage function (only exporting and importing of parameter data)
- Recording functions
- Routing
- Communication with HART field devices via remote I/Os
The functions of SIMATIC PDM Single Point cannot be extended (e.g. to SIMATIC PDM Basic or with the routing option through S7‑400), nor can it be expanded with TAG options or PowerPacks.
Predefined product configurations
SIMATIC PDM Service
This is a predefined product configuration especially for mobile use in servicing for projects with up to 128 TAGs. It offers service engineers all functions of SIMATIC PDM Basic, including modification logbook, calibration report and detailed diagnostics in the lifelist. SIMATIC PDM Service can be expanded by the functional options "Integration in STEP 7/PCS 7", "Routing through S7‑400" and "Communication via standard HART multiplexer" as well as by SIMATIC PDM PowerPacks (see under TAG options/PowerPacks). The following program components are part of SIMATIC PDM Service:
- SIMATIC PDM Basic
- Option: 128 TAGs
SIMATIC PDM PCS 7
SIMATIC PDM PCS 7 is a predefined product configuration for integration into the engineering system (engineering tool set) and the maintenance station of SIMATIC PCS 7. The product version designed for projects with up to 128 TAGs allows the use of all functions of SIMATIC PDM Basic (including modification logbook, calibration report and detailed diagnostics in the lifelist). In addition, it contains the functionality for integration of the SIMATIC PDM into HW-Config as well as the routing from the central engineering system to the field devices. SIMATIC PDM PCS 7 can be expanded by the option "Communication via standard HART multiplexer" and by SIMATIC PDM PowerPacks (see under TAG options/PowerPacks). The following program components are part of SIMATIC PDM PCS 7:
- SIMATIC PDM Basic
- Option: 128 TAGs
- Option: Integration in STEP 7/SIMATIC PCS 7
- Option: Routing through S7‑400
SIMATIC PDM S7
SIMATIC PDM S7 is a predefined product configuration tailored to the use of SIMATIC PDM in a SIMATIC S7 configuration environment. It offers all functions of SIMATIC PDM Basic (including modification logbook, calibration report and detailed diagnostics in the lifelist) as well as the functionality for integration of PDM into HW-Config. SIMATIC PDM S7 can be expanded by the functional options "Routing through S7‑400" und "Communication via standard HART multiplexer" and by SIMATIC PDM PowerPacks (see under TAG options/PowerPacks ). The following program components are part of SIMATIC PDM S7:
- SIMATIC PDM Basic
- Option: 128 TAGs
- Option: Integration in STEP 7/SIMATIC PCS 7
Components for individual configuration
SIMATIC PDM Basic
SIMATIC PDM Basic is the basic component for production of individual SIMATIC PDM configurations from single components. It contains all functions required for operation and parameterization of the devices, as well as enabling for the following communication modes:
- PROFIBUS DP/PA,
- HART communication (modem, RS 232 and PROFIBUS),
- Modbus,
- SIREC bus and
- SIPART DR.
Without TAG expansion, SIMATIC PDM Basic can manage projects with up to 4 TAGs, and can be used - with observation of the system requirements - for stand-alone operation on any computer (PC/notebook) with local connection to bus segments or with direct connection to the device.
SIMATIC PDM Basic can be expanded by functional options and TAG options/PowerPacks. Use of the following functions requires at least 128 TAGs:
- Modification logbook
- Calibration report
- Detailed diagnostics in the lifelist
SIMATIC PDM Basic is also available in the form of a rental license for 50 operating hours for low-cost processing of short-term projects.
SIMATIC PDM option: Integration in STEP 7/PCS 7
This option is required for use of SIMATIC PDM within a SIMATIC S7 or SIMATIC PCS 7 project with a local connection to the PROFIBUS. SIMATIC PDM can then be started directly from the hardware project (HW-Config).
SIMATIC PDM option: Routing through S7‑400
This option is required additive to the option "Integration in STEP7/PCS 7" if SIMATIC PDM is to be used in a central engineering system for SIMATIC PCS 7/S7 with Ethernet bus connection to the automation systems for plant-wide configuration, parameterization, commissioning and diagnostics of field devices.
SIMATIC PDM option: Communication via standard HART multiplexer
This option permits SIMATIC PDM to use the HART OPC server for communication with HART field devices via HART multiplexers.
TAG options/PowerPacks
A TAG corresponds to a SIMATIC PDM object, which represents individual field devices or components within a project, e.g. measuring instruments, positioners, switching devices or remote I/Os. TAGs are also relevant for diagnostics with the lifelist of SIMATIC PDM. In this case, TAGs are considered to be all recognized devices with diagnostics capability, whose detailed diagnostics is effected through the device description (EDD).
In contrast to PowerPacks, TAG options are only suitable for product configurations on the basis of individual components. Using the SIMATIC PDM TAG options, the basic software SIMATIC PDM Basic can be expanded from 4 TAGs to 128, 512, 1024 or 2048 TAGs, and with the help of an additive PowerPack also to unlimited TAGs.
The number of available TAGs can be subsequently increased for all SIMATIC PDM product configurations by means of the SIMATIC PDM PowerPacks. PowerPacks are available for expansion to 512, 1024, 2048 and unlimited TAGs.
Demonstration software
A demonstration version of SIMATIC PDM is also available. Online communication and storage functions are not available with this version.
Функции
Parameter view of SIMATIC PDM with trend curve and online display
Core functions
- Adjustment and modification of device parameters
- Comparing (e.g. project and device data)
- Plausibility testing of data input
- Device identification and testing
- Device status indication with operating modes, alarms and states
- Simulation
- Diagnostics (standard, detailed)
- Management (e.g. networks and PCs)
- Export/import (parameter data, reports)
- Commissioning functions, e.g. measuring circuit tests of device data
- Device replacement (lifecycle management)
- Global and device-specific modification logbook for user operations (audit trail)
- Device-specific calibration reports
- Graphic presentations of echo envelope curves, trend displays, valve diagnosis results etc.
- Presentation of incorporated manuals
- Document manager for integration of up to 10 multimedia files
Support of system management
SIMATIC PDM supports the operative system management in particular through:
- Uniform presentation and operation of devices
- Indicators for preventive maintenance and servicing
- Detection of changes in the project and device
- Increasing the operational reliability
- Reducing the investment, operating and maintenance costs
- Graded user privileges including password protection
PDM lifelist with status and diagnostics display
Graphical user interface
The GUI of SIMATIC PDM satisfies the requirements of the directives VDI/VDE GMA 2187 and IEC 65/349/CD. Even complex devices with several hundred parameters can thus be represented clearly and processed quickly. Using SIMATIC PDM it is very easy to navigate in highly complex stations such as remote I/Os and even connected field devices.
Several views are available to users to help them with their tasks:
- Hardware project view
- Process device network view (preferably for stand-alone application)
- Process device plant view as TAG-related view, also with display of diagnostics information
- Parameter view for parameterizing the field devices
- Lifelist view for commissioning and service
Communication
SIMATIC PDM supports several communication protocols and components for communicating with devices that have the following interfaces:
- PROFIBUS DP/PA interface
- HART interface
- Modbus interface
- Special interface from Siemens
Further communication protocols on request.
Routing
From the central engineering system of the SIMATIC PCS 7 process control system, you can navigate with SIMATIC PDM through the various bus systems and remote I/Os down to the connected devices. By means of this routing functionality, every device in the plant which can be parameterized per EDD can be processed. The following processing functions are available:
- Read diagnostics information from the device
- Modify device settings
- Adjust and calibrate devices
- Monitor process values
- Create simulation values
- Reparameterize devices.
Интеграция
Device Integration
SIMATIC PDM supports all devices described by EDD (Electronic Device Description). EDD is standardized to EN 50391 and IEC 61804. Internationally it is the most widely used standardized technology for device integration. At the same time it is the directive of the established organizations for PROFIBUS (PNO: PROFIBUS International) and HART (HCF: HART Communication Foundation).
The devices are directly integrated in SIMATIC PDM through their EDD or the current HCF catalog. In the EDD the device is described in terms of its functions and construction using the Electronic Device Description Language (EDDL) specified by PNO. Using this description, SIMATIC PDM automatically creates its user interface with the specific device data.
The current device catalog of SIMATIC PDM covers more than 1200 devices from over 100 manufacturers world-wide. In addition, devices from all manufacturers can be integrated in SIMATIC PDM by simply importing their EDDs. It is thus possible to keep the device range up to date at all times and to add to the number of manufacturers and devices supported by SIMATIC PDM. To permit improved transparency, SIMATIC PDM also allows the creation of project-specific device catalogs. If devices are to be used which cannot be found in the SIMATIC PDM device catalog, we will be glad to help you integrate them.
Contact addresses
Siemens AG, Automation and Drives,
Technical Support
Europe
Phone: +49 180 50 50 222
Fax: +49 180 50 50 223
E-mail: FPlease fill in a Support Request on the Internet (see below for address)
Asia/Pacific
Phone: +86 1064 719 990
Fax: +86 1064 747 474
E-mail: adsupport.asia@siemens.com
America
Phone: +1 423 262 2522
Fax: +1 423 262 2200
E-mail: techsupport.sea@siemens.com
Support Request
Технические данные
Requirements for stand-alone operation
|
|
Hardware
|
- PG/PC/notebook with processor corresponding to operating system requirements
- Main memory 256 MB or more
- Vacant hard disk 210 MB or more
|
Operating systems (alternative)
|
- Microsoft Windows 2000 Professional SP1 or higher
- Microsoft Windows XP Professional SP1/SP2
|
Further software components
|
- SIMATIC PDM integrated in STEP 7
|
STEP 7 V5.1 or higher with ServicePack 6 or higher, order separately
|
|
|