Тех. данные
Дизайн
A CU320 Control Unit can perform the communication, open-loop and closed-loop control functions for several Motor Modules. The computing capacity requirement increases in proportion to the number of connected Motor Modules and system components and in relation to the dynamic response required. The full computing capacity of the CU320 Control Unit is only available on systems with perfomance expansion 1.
The computing capacity requirement and utilization of the CU320 Control Unit can be calculated with the SIZER configuration tool. The firmware options are supplied in license form, which are written to the CompactFlash card in the factory as license codes.
The firmware options can also be enabled on-site, for example, if the performance expansions required are not known at the time of placing the order. You will need the serial number of the CompactFlash card and the order number of the firmware option to be enabled. With this information, you can purchase the associated license code from a license database and enable the firmware option. The license code is only valid for the CompactFlash card declared and cannot be transferred to other CompactFlash cards.
The CU310 Control Unit has been designed to control only single axes. Performance expansion 1 is not required in this case.
Дальнейшая информация
Firmware version
The firmware version is encoded in the order (part) number of the CompactFlash card supplied. For the above order number the most recent firmware version is always installed on shipped CompactFlash cards, i.e. the order number on the shipped CompactFlash cards may not necessarily match the order number of the ordered CompactFlash cards.
The firmware version is encoded as follows in the order number:
|
Order No.: 6SL3054‑
|
0❑❑0❑‑1AA0
|
|
Firmware version
|
1
2
3
4
|
↑
B
C
D
E
|
|
Version
|
.1
.2
.3
.4
.5
.6
|
↑
B
C
D
E
F
G
|
|
without performance expansion
|
↑
0
|
|
with performance expansion 1
|
1
|
Example: A CompactFlash card with the order number 6SL3054‑0AA00‑1AA0 is ordered (as specified in the catalog). The CompactFlash card with the most recent firmware version is confirmed and shipped, e.g. order number 6SL3054‑0CE00‑1AA0 for firmware version 2.4. In this way, it is possible to specify a specific firmware version or the most recent firmware version in a replacement part order.
