Обзор
A comprehensive range of accessories is available for the SIDOOR elevator door systems.
This is necessary to ensure low-noise operation of the door by the controller. The geared motors can be optimally integrated into the respective door drive system.
Rubber-metal anti-vibration mounts for geared motors
To ensure low-noise door operation, SIDOOR geared motors are integrated in the door system using rubber-metal anti-vibration mounts.
- Rubber-metal anti-vibration mount 6FB1104‑0AT02‑0AD0 for geared motors with a door weight of less than 300 kg
- Rubber-metal anti-vibration mount 6FB1104‑0AT01‑0AD0 for geared motors with a door weight of 300 kg or more
Rubber-metal anti-vibration mount 6FB1104‑0AT02‑0AD0
Rubber-metal anti-vibration mount 6FB1104‑0AT01‑0AD0
Mounting bracket
Two different mounting brackets are available with elongated holes:
- Mounting bracket 6FB1104‑0AT01‑0AS0 for the geared motors for flexible accommodation of the rubber-bonded metal
- Mounting bracket 6FB1104‑0AT02‑0AS0 for the deflector unit, this enables the toothed belt to be set to the required belt tension.
Mounting bracket 6FB1104‑0AT01‑0AS0 for mounting the geared motor
Mounting bracket 6FB1104‑0AT02‑0AS0 for the deflector unit
Door clutch holder
The door clutch holder serves to connect the respective door leaf by means of a toothed belt while also functioning as a toothed-belt lock. One door clutch holder per door leaf is required. The toothed-belt lock can accommodate both open ends of the toothed belt.
A door clutch holder is available for each toothed belt width:
- Width 12 mm: 6FB1104‑0AT01‑0CP0
- Width 14 mm: 6FB1104‑0AT02‑0CP0
Door clutch holder 6FB1104‑0AT01‑0CP0 (packaging size = 1 unit)
Deflector unit
The deflector unit 6FB1104‑0AT03‑0AS0 contains an embedded belt pulley which can be mounted on the door system.
The toothed belt STS is redirected via this deflector unit.
Deflector unit 6FB1104‑0AT03‑0AS0
Toothed belt STS
The door system is moved between the end positions of the door using the STS toothed belts. Two different toothed belt lengths can be ordered for each toothed belt width.
Toothed belt width 12 mm:
- Length 4 m: 6FB1104‑0AT01‑0AB0
- Length 45 m: 6FB1104‑0AT02‑0AB0
Toothed belt width 14 mm:
- Length 4 m: 6FB1104‑0AT03‑0AB0
- Length 55 m: 6FB1104‑0AT04‑0AB0
Toothed belt 6FB1104‑0AT01‑0AB0, length 4 m
Toothed belt 6FB1104‑0AT02‑0AB0, length 45 m
Заказные данные
Заказной № |
Вес, кг |
Описание |
Наличие на складе |
Заказать |
6FB1104-0AT01-0AB0 |
0.26 |
SIDOOR зубчатый ремень (supertorque) , длина 4м, ширина 12мм. |
------ |
|
6FB1104-0AT01-0AD0 |
1.2 |
SIDOOR антивибрационная накладка из резины и металла, рекомендована для использования совместно со следующими моторами SIDOOR - SIDOOR M4 R, SIDOOR M4 L, SIDOOR M5 R, SIDOOR M5 L, SIDOOR MDG400 R,SIDOOR MDG400 L |
------ |
|
6FB1104-0AT01-0AS0 |
1.04 |
Монтажная скоба SIDOOR для монтажа антивибрационной накладки |
------ |
|
6FB1104-0AT01-0CP0 |
0.147 |
Монтажный элемент SIDOOR для соединения двух сторон зубчатого ремня(12мм) и присоединения соответствующей дверной створки к зубчатому ремню |
------ |
|
6FB1104-0AT02-0AB0 |
2.95 |
SIDOOR зубчатый ремень (supertorque) , длина 45м, ширина 12мм. |
------ |
|
6FB1104-0AT02-0AD0 |
1 |
SIDOOR антивибрационная накладка из резины и металла, рекомендована для использования совместно со следующими моторами SIDOOR - SIDOOR M3 R, SIDOOR M3 L, SIDOOR M2 R, SIDOOR M2 L, SIDOOR MEG250 R,L, SIDOOR MDG180 R,L |
------ |
|
6FB1104-0AT02-0AS0 |
0.78 |
Монтажная скоба SIDOOR с натяжителем для натяжения зубчатого ремня |
------ |
|
6FB1104-0AT03-0AS0 |
0.5 |
Монтажный комплект с роликом для приводного ремня систем SIDOOR |
------ |
|
Тех. данные