Обзор

Quadruple

The EIB quadruple switching actuator is connected by means of plug-in connectors. In this way it combines the advantages of the EIB with the advantages of the pluggable electrical installation.

Its comprehensive field of application permits the actuator to be parameterized as a standard switch, time switch or stairwell time switch. The outputs can be switched on or off on bus voltage failure/restoration.

Two surface-mounted switching actuator designs are available. One variant has three phases, the other variant has one phase.

• Quadruple, 3-phase
  gesis EIB V-0/4
• Quadruple, 1-phase
  gesis EIB V-0/4 1PH

Triple

gesis EIB V-0/6

The EIB actuator with six switching outputs is connected by means of plug-in connectors. It can be mounted in a different location and combines the advantages of the EIB with the advantages of the pluggable electrical installation.

Its comprehensive field of application permits it to administrate time delays, the type of relay operation, the transmission type of the status object, four light settings, the behavior on bus voltage failure/restoration, and the evaluation of a blocking object. Each output can be parameterized and activated separately, the statuses can also be read individually. The block for the outputs is activated with a shared command, but can be evaluated separately for each output.

The surface-mounted actuator has a 3-phase supply. The relays have a switching current of 16 A. The voltage distribution from the infeed to the outputs is fixed.

Заказные данные