|
Обзор
Обзор
Milltronics MCS is a compact, rugged, modular, heavy-duty belt scale for use in mobile crushers and aggregate screening plants.
Idler not included with belt scale.
Область применения
Milltronics MCS provides continuous, in-line weighing at minimal cost. The stainless steel load cells ensure long-term, consistent, reliable measurement.
The modular construction and easy assembly of the MCS ensures quick delivery to meet even the tightest of schedules.
Operating with Milltronics BW100 or BW500 microprocessor-based integrators, the MCS provides indication of flow rate, total weight, belt load, and belt speed of bulk solids materials on a belt conveyor.
To complete the weighing system, include a speed sensor to monitor conveyor belt speed for input to the integrator. On mobile crushing equipment, the TASS speed sensor is a compact, rugged speed sensor designed for use with the MCS.
Заказные данные
Аксессуары
| Заказной № |
Вес, кг |
Описание |
Наличие на складе |
Заказать |
| 7MH7723-1AA |
0.1 |
ПРИНАДЛЕЖНОСТЬ ДЛЯ AS 100 |
------ |
|
| 7MH7723-1BN |
0.2 |
leaf spring, A2 |
------ |
|
| 7MH7723-1BP |
0.2 |
ILE-37, leaf spring,A3 |
------ |
|
| 7MH7723-1BQ |
2 |
ILE-61, Leaf spring |
------ |
|
| 7MH7723-1BY |
2 |
Mcs cal weight a c/w idler clip |
------ |
|
| 7MH7723-1HA |
1.5 |
MBS/MCS flat weights/MWL retrofit set |
------ |
|
| 7MH7723-1NA |
0.95 |
Load cell cable spare part set |
------ |
|
| 7MH7725-1DH |
2.268 |
load cell 50 LB, stainless steel, F, for MCS, |
------ |
|
| 7MH7725-1DJ |
2.268 |
load cell 100 LB, stainless steel, F, for MCS |
------ |
|
| 7MH7725-1DK |
2.268 |
load cell 250 LB, stainless steel, F, for MCS, |
------ |
|
| 7MH7725-1DL |
2.268 |
load cell 50 LB, stainless steel for MCS, CSA/FM/ATEX, |
------ |
|
| 7MH7725-1DM |
2.268 |
load cell 100 LB, stainless steel for MCS, CSA/FM/ATEX, |
------ |
|
| 7MH7725-1DN |
2.268 |
load cell 250 LB, stainless steel for MCS, CSA/FM/ATEX, |
------ |
|
| 7MH7725-1DP |
2.268 |
load cell 500 LB, stainless steel for MCS, CSA/FM/ATEX, |
------ |
|
| 7MH7725-1DQ |
2.268 |
load cell 25LB, stainless steel for MCS, CSA/FM/ATEX, |
------ |
|
| 7MH7725-1DR |
2.268 |
stainless steel load cell,MCS, 250 LB, CSA/FM/ATEX, |
------ |
|
| 7MH7725-1DS |
2.268 |
load cell 500 LB, stainless steel, F, for MCS, |
------ |
|
| 7ML1998-5KH81 |
0.04 |
MANUAL, 'MCS/MSI/MMI, MULTI-LANGUAGE |
------ |
|
| A5E33071768 |
0.01 |
INSTRUCTION MANUAL FOR MILLTRONICS MCS BELT SCALE, MULTI LANGUAGE. |
------ |
|
Тех. данные
Особенности
- Rugged design
- Low profile
- Easy retrofit
- Low cost
- Stainless steel load cells
- Calibration weight included
Технические данные
|
Milltronics MCS
|
|
|
Mode of operation
|
|
|
Measuring principle
|
Strain gauge load cells measuring load on belt conveyor idlers
|
|
Typical application
|
Mobile crusher systems
|
|
Performance
|
|
|
Accuracy
|
± 1 % to 2 % of totalization over 4 to 1 operating range, application dependent
± 1 % for non-mobile applications
|
|
Belt design
|
|
|
Belt width
|
- Up to 1000 mm (42” CEMA) width
- Refer to the outline dimension section
|
|
Belt speed
|
Up to 3 m/s (600 fpm)
|
|
Capacity
|
Up to 1200 t/h (1320 STPH) at maximum belt speed
|
|
Conveyor incline
|
- ± 20° from horizontal, fixed incline
- up to ± 30° with reduced accuracy1)
|
|
Idlers
|
|
|
Idler profile
|
- Flat to 35°
- To 45° with reduced accuracy1)
|
|
Idler diameter
|
100 to 150 mm (4 to 6”)
|
|
Idler spacing
|
0.6 to 1.2 m (2.0 to 4.0 ft)
|
|
Load cell
|
|
|
Construction
|
17-4 PH (1.4568) stainless steel construction with 304 (1.4301) stainless steel cover
|
|
Enclosure
|
IP65
|
|
Excitation
|
10 V DC nominal, 15 V DC maximum
|
|
Output
|
2 mV/V excitation at rated load cell capacity
|
|
Non-linearity and hysteresis
|
0.02 % of rated output
|
|
Non-repeatability
|
0.01 % of rated output
|
|
Capacity
|
50, 100, 250 lb stainless steel
|
|
Overload
|
150 % of rated capacity, ultimate 300 % of rated capacity
|
|
Temperature
|
- -40 to +75°C (-40 to +167 °F) operating range
- -18 to +65°C (0 to +150°F) compensated
|
|
Weight
|
Up to 20 kg (44 lbs), 10 kg (22 lb) per side
|
|
Interconnection wiring
(to integrator)
|
- < 150 m (500 ft) 18 AWG (0.75 mm²) 6 conductor shielded cable
- > 150 m (500 ft) to 300m (1000 ft) 18 to 22 AWG (0.75 to 0.34 mm²), 8 conductor shielded cable
|
|
Approvals
|
- CSA/FM Class II, Div. 1, Groups E,F,G and Class III
- ATEX II 2D, Ex tD A21 IP65 T90 ºC
- CE
|
1) Review by Siemens application engineer required.
Чертеж
MCS dimensions
Схема подключения
MCS connections
|
|
