Обзор

The charging controller is the central component in electric vehicle charging stations. SIPLUS ECC charging controllers comply with the charging standard IEC 61851 Mode 3.

They perform the following functions:

• Transferring the maximum charging current from the charging station to the electric vehicle
• Detecting the charging cable and its reliable current carrying capacity
• Safety functions
• Evaluating the status signals from the electric vehicle
• Controlling the load tap-off
• Signaling the charging states by means of LEDs

SIPLUS ECC charging controllers are available in various versions:

CM-100

Compact, low-cost charging controller for home charging applications. The versions available cover all the charging currents defined in IEC/EN 61851.

Charging system with SIPLUS ECC1000

CM-230/CM-230-C standalone versions

These charging controllers with Ethernet connection are used for home and public charging applications. Parameters of the controllers can be changed and current information about the state of the charging operation viewed through the web interface. The built-in sensors on the CM-230 standalone version allow the humidity and temperature to be monitored.

Charging system with SIPLUS ECC2000

CM230 managed version

This charging controller with Ethernet connection is used for complex public charging applications. The controller is typically used as a separate I/O module in combination with other charging controllers which are integrated through Ethernet in a higher-level control system. The managed version offers greater flexibility for the system integrator/operating company, e.g. individual controlling of free I/O modules.

A function block (FB) is available for linking to SIMATIC controllers.

Multiple charging system with SIPLUS ECC2000

Дальнейшая информация



For further information on these and other components that are particularly suitable for constructing charging systems with SIPLUS ECC1000 and SIPLUS ECC2000, see http://www.siemens.com/industrymall.

• SIRIUS switching and protection devices:
  • Contactors for special applications, see https://eb.automation.siemens.com/mall/en/us/Catalog/Products/8210565?tree=CatalogTree
  • Power contactors for switching motors, see https://eb.automation.siemens.com/mall/en/us/Catalog/Products/8210250?tree=CatalogTree
  • Motor starter protectors, see https://eb.automation.siemens.com/mall/en/us/Catalog/Products/10026206?tree=CatalogTree
• SENTRON protective, switching, measuring, and monitoring devices:
  • 5SM3 residual current operated circuit breakers, see https://eb.automation.siemens.com/mall/en/us/Catalog/Products/10168206?tree=CatalogTree
  • 7KT PAC and 7KM PAC measuring devices, see https://eb.automation.siemens.com/mall/en/us/Catalog/Products/10165550?tree=CatalogTree
  • 5SD7 surge arresters, see https://eb.automation.siemens.com/mall/en/us/Catalog/Products/10167488?tree=CatalogTree
• Power supply:
  • LOGO!Power 6EP1 power supplies, see https://eb.automation.siemens.com/mall/en/us/Catalog/Products/10073746?tree=CatalogTree
  • SIPLUS extreme 7AG1 power supplies, see https://eb.automation.siemens.com/mall/en/us/Catalog/Products/10073170?tree=CatalogTree

For operating instructions and other technical data, see http://support.automation.siemens.com/WW/view/en/46476435/133200.