Обзор



SIMATIC ET 200pro PS, 24 V, 8 A

The SIMATIC ET 200pro PS is a power supply with IP67 degree of protection which features the same technology and design as the ET 200pro distributed I/O system.

It is suitable for single-line installation on the ET 200pro module rack, but can also be mounted directly on a mounting plate.

Locating the power supply away from the electronics cabinet/enclosure reduces the thermal load and the required size for the cabinet/enclosure.

The power is supplied at connector X1. The X2 connector allows the mains voltage to be looped to other modules.

The cable for the 24 V DC supply of the ET 200pro is connected via ECOFAST standard connectors to the SIMATIC ET 200pro PS. The other cable end is left open, enabling it to be fitted with an ECOFAST connector, 7/8" round connector or a programming device screw connector and individually adapted to the various connection systems of power module terminal modules of the ET 200pro.

SIMATIC ET 200pro PS reports its status via signaling contacts for "24 V DC OK" and "Overtemperature".

Заказные данные

Заказной №	Вес, кг	Описание	Наличие на складе	Заказать
6ES7148-4PC00-0HA0	2.8	SIMATIC ET200PRO PS, БЛОК ПИТАНИЯ, КЛАСС ЗАЩИТЫ I, CLASS I ВХОД: 3Х ~400-480 В, ВЫХОД: = 24 В / 8 A	------

Аксессуары

Заказной №	Вес, кг	Описание	Наличие на складе	Заказать
3RK1902-0CJ00	0.093	ЗАГЛУШКА ДЛЯ 9-ПОЛЮСНЫХ СИЛОВЫХ РАЗЪЕМОВ (УПАК = 10 ШТ. )	------
3RK1902-0CK00	0.012	ЗАГЛУШКА ДЛЯ 9-ПОЛЮСНЫХ СИЛОВЫХ РАЗЪЕМОВ 1ШТ.	------
3RK1911-2BE30	2	Socket insert Han Q4/2 5 contact sockets 6 mm2, 2 auxiliary contacts 0.5 mm2 pin 11+12 Connector set power supply for connection to MS, RSM of ET200pro, M200D Sleeve housing angled Outgoing unit including screw connection	------
3RK1911-2BF10	0.3	ET 200PRO MS/FC/RSM CONNEC.SET CABLE-END CONN.HOOD ANGLED HANQ4/2 WITH PIN INSERT 4MM2 ДЛЯ POWER LOOP-THROUGH IНЗLUDING CABLE GLANDS	------

Дальнейшая информация



For more information and technical specifications of the SIMATIC ET 200pro PS power supply, see "SITOP Power Supplies in SIMATIC Design" in the Catalog KT 10.1.

Additional information is available via the Internet at:

• SITOP power supplies:
  http://www.siemens.de/sitop
• CAx data (2D, 3D, circuit diagram macros):
  http://www.siemens.com/sitop-cax
• Operating instructions:
  http://www.siemens.com/sitop/manuals
• SITOP Selection Tool for selecting power supplies:
  http://www.siemens.com/sitop-selection-tool