Обзор



MOTION‑CONNECT DRIVE‑CLiQ signal cable with IP20/IP67 connector

Signal cables are pre-assembled and are sold by the meter for the connection of a variety of components.

The following different types of cable are available:

• DRIVE‑CLiQ signal cables
• MOTION‑CONNECT DRIVE‑CLiQ signal cables
• MOTION‑CONNECT pre-assembled signal cables

Type of delivery for pre-assembled signal cables

Pre-assembled signal cables are available in units of 10 cm (3.94 in).

The cables are supplied on reels up to 30 kg or 100 m (66.2 lb or 328 ft). Above 30 kg or 100 m (66.2 lb or 328 ft), cable drums are used instead of reels.

;

Область применения



DRIVE‑CLiQ signal cables without 24 V DC cores

DRIVE‑CLiQ signal cables without 24 V DC cores in fixed lengths

DRIVE‑CLiQ signal cables without 24 V DC cores, in exact meter lengths

DRIVE‑CLiQ signal cables without 24 V DC cores are used to connect components with DRIVE-CLiQ connections which have a separate or external 24 V DC power supply.

MOTION‑CONNECT DRIVE‑CLiQ signal cables with 24 V DC cores

MOTION‑CONNECT DRIVE‑CLiQ signal cables with 24 V DC cores in degree of protection IP20/IP67

MOTION‑CONNECT DRIVE‑CLiQ signal cables with 24 V DC cores are used whenever components with DRIVE-CLiQ connections must meet high requirements such as mechanical stress and oil resistance, e.g. where a connection is made outside the cabinet between Power Modules/Motor Modules and SIMOTICS S-1FK7/SIMOTICS M-1PH8 motors with DRIVE-CLiQ interface.

MOTION-CONNECT pre-assembled signal cables

MOTION-CONNECT pre-assembled signal cables are used whenever motor encoders on motors without DRIVE-CLiQ interface are connected to Sensor Modules.

;