Обзор
SIDOOR ATD400T Interior Railway Door Drive
The SIDOOR ATD400T interior railway door drive is an "intelligent" door drive which enables gangway doors to be opened and closed at adjustable speeds and accelerations.
- Relay module design
- For dynamic door weights up to 180 kg
- Automatic door weight detection
- Operating temperature -20 to +70 °C 1)
- Flexible motor management (two different motor types), automatic detection
- Opening width 0.25 to 4 m
- Door can be operated with and without closing springs (60 to 80 N)
- With two identical door leaves, can be used up to a train inclination of 0 to 10%
- Forces and energies are limited in accordance with EN 14752
- EMC according to EN 50121-3-2
- Fulfills HL3 according to fire protection standard EN 45545-2 (Railway applications - Fire protection on rail vehicles)
- Vandal-proof
1) Note:
- Maximum output current at 24 V DC:
- 0.4 A at ≤ 55 °C ambient temperature during operation
- 0.1 A from 55 °C to 70 °C ambient temperature during operation, with restrictions at operating temperatures > 55 °C
- Maximum ambient temperature during operation:
- 55 °C
- 70 °C with restrictions at operating temperatures > 55 °C
- Restrictions at operating temperatures > 55 °C:
- Only use the 24 V output voltage to operate control inputs (max. 0.1 A)
- Use a sufficiently large (at least 350 x 350 mm), unpainted, metal mounting plate
- The maximum drive parameters are restricted to the default values
- If temperature class T3 according to EN 50155 is used, the maximum air temperature of 85 °C must not be exceeded near the printed-circuit board
Область применения
The SIDOOR ATD400T interior railway door drive is an "intelligent" door drive which enables gangway doors to be opened and closed at adjustable speeds and accelerations.
The maintenance-free drive unit consists of a speed-controlled DC motor with non-self-locking gearing.
Two different motors are available:
- SIDOOR M2 geared motor
(24 V DC/1.8 A; motor for max. overall door leaf weight 120 kg, degree of protection IP40) - SIDOOR M3 geared motor
(30 V DC/4.0 A; motor for max. overall door leaf weight of 180 kg, degree of protection IP40)
They must be ordered separately, see "Geared motors"..
Operation of the door drive does not require limit switches. The door width and the "OPEN"/"CLOSE" positions are determined automatically.
The current operating states are shown on a 7-segment display directly on the SIDOOR ATD400T RELAY controller. They can also be displayed externally using the Software Kit or Service Tool, see "Additional units".
Forces are transferred via a toothed belt, which passes over a deflector unit and can be fitted with two door clutch holders. The accessories are not included in the scope of delivery, see "Accessories".
This enables it to drive both one-sided and centrally opening doors.
Заказные данные
| Заказной № |
Вес, кг |
Описание |
Наличие на складе |
Заказать |
| 6FB1121-0BM13-3AT2 |
0.72 |
SIDOOR AT400T контрольный модуль с релейными выходами для внутренних дверей вагона поезда. Макс. вес двери 400кг. 36VDC, 1*RS485, 4*DI, 3*реле, 1*24VDC вывод, -20°C .. +50°C, EN 50155, EN 50121-3-2, EN 45545-2, EN 61373 |
------ |
|
Тех. данные
