ENG: SITRANS TH200/TH300, for mounting in sensor head Siemens (Сименс) доставка по России со склада и под заказ

This universal transmitter integrates your temperature measurement in the TIA concept (Totally Integrated Automation). This makes central engineering possible, bringing you time and cost benefits.

SIMATIC PDM or another HART programming tool can be used for the configuration.

Область применения

The SITRANS TH200 and SITRANS TH300 transmitters can be used in all industries. Due to their compact size they can be installed in the connection head type B (DIN 43729) or larger. The following sensors/signal sources can be connected over their universal input module:

Resistance thermometer
Thermocouple elements
Resistance-based sensors/potentiometers
DC voltage sources

The output signal is a direct current from 4 to 20 mA in accordance with the sensor characteristic.

Transmitters of the "Intrinsically-safe" type of protection can be installed within potentially explosive atmospheres (zone 0). The declarations of conformity comply with the IEC standard.

Заказные данные

Заказной №	Вес, кг	Описание	Наличие на складе
7NG3211-1AN00	0.08	Измерительный преобразователь температуры sitrans th200, для монтажа в головку сенсора, 2-х проводный, 4-20 ma, программируемый, с гальванической развязкой, взрывозащита (atex): искробезопасное исполнение и для зоны 2, без руководства	------
7NG3211-1BN00	0.08	Измерительный преобразователь температуры sitrans th200, для монтажа в головку сенсора, 2-х проводный, 4-20 ma, программируемый, с гальванической развязкой, взрывозащита (cfmus): искробезопасное исполнение и для зоны 2, без руководства	------
7NG3211-1NN00	0.08	Измерительный преобразователь температуры sitrans th200, для монтажа в головку сенсора, 2-х проводный, 4-20 ma, программируемый, с гальванической развязкой, без взрывозащиты, без руководства	------

Аксессуары

Заказной №	Вес, кг	Описание	Наличие на складе
7NG3092-8KA	0.06	АДАПТЕР ДЛЯ МОНТАЖА НА ОПОРНУЮ БАЛКУ ПРЕОБРАЗОВАТЕЛЯ МОНТИРУЕМОГО В ГОЛОВУ (5 ШТ.)	------
7NG3092-8KC	0.03	КАБЕЛЬ RTD ДАТЧИКОВ ДЛЯ ПРЕОБРАЗОВАТЕЛЕЙ, МОНТИРУЕМЫХ В ГОЛОВКЕ, 4-ПРОВОДНОЙ, 150 ММ, В УПАКОВКЕ 5 ШТ.	------
7NG3092-8KM	0.43	Модем с интерфейсом rs232 для параметрирования измерительных преобразователей температуры sitrans th100/200, с программным обеспечением siprom t	------
7NG3092-8KU	0.3	МОДЕМ С USB- ИНТЕРФЕЙСОМ ДЛЯ ПАРАМЕТРИРОВАНИЯ ИЗМЕРИТЕЛЬНЫХ ПРЕОБРАЗОВАТЕЛЕЙ ТЕМПЕРАТУРЫ SITRANS TH100/200, С ПРОГРАММНЫМ ОБЕСПЕЧЕНИЕМ SIPROM T	------
A5E00364512	0.1	Cd-rom для приборов измерения температур с документацией и программным обеспечением siprom t	------

Тех. данные

Особенности

Two-wire transmitter
Assembly in connection head type B (DIN 43729) or larger, or on a standard DIN rail
Communication-capable (HART protocol rev. 5.9 for SITRANS TH300, proprietary protocol for SITRANS TH200); this enables programming of sensor connection, measuring range, etc.
Electrically isolated
Intrinsically-safe version for use in potentially explosive areas
Two additional test pins for connection of a multimeter support the measurement of the current signal without interrupting the current loop
Operational status indication (LED green or red)
Special characteristic
Diagnostic functions with SITRANS TH300 (slave pointer, operating hours counter, simulation)

Функции

Mode of operation

The signal output by a resistance-based sensor (two-wire, three-wire or four-wire system) or thermocouple is converted into a digital signal by an analog-to-digital converter. This is then evaluated in a microcontroller (μC1), corrected in accordance with the sensor characteristic and transmitted to the microcontroller (μC2) over the electrical isolation. There, the analog output value is calculated, the function status is determined over LED, and the communication data are preprocessed Over a digital/analog converter, the measured value is then converted to an output current of 4 to 20 mA. The power supply is located in the output signal circuit.

The SITRANS TH200 and SITRANS TH300 are parameterized and operated using a PC, which is connected to the two-wire system over a suitable interface module (SIPROM T modem or HART modem). A hand-held communicator can also be used to parameterize the SITRANS TH300. The signals required for communication according to the HART protocol rev. 5.9 are superimposed on the current signal in accordance with the FSK method (Frequency Shift Keying). The data specific to the transmitter and the data for parameterization are stored in two non-volatile memories (EEPROM).

Function diagram for SITRANS TH200 and SITRANS TH300

Технические данные

Input
Resistance thermometer
Measured variable	Temperature
Sensor type
to IEC 60751	Pt25 to Pt1000
to JIS C 1604; a=0.00392 K-1	Pt25 to Pt1000
to IEC 60751	Ni25 to Ni1000
Special type	over special characteristic (max. 30 points)
Sensor factor	0.25 ... 10 (adaptation of the basic type, e.g. Pt100 to version Pt25 ... Pt1000)
Units	°C or °F
Connection
Standard connection	1 resistance thermometer (RTD) in 2-wire, 3-wire or 4-wire system
Generation of average value	2 identical resistance thermometers in 2-wire system for generation of average temperature
Generation of difference	2 identical resistance thermometers (RTD) in 2-wire system (RTD 1 – RTD 2 or RTD 2 – RTD 1)
Interface
Two-wire system	Parameterizable line resistance ≤ 100 Ω (loop resistance)
Three-wire system	No balancing required
Four-wire system	No balancing required
Sensor current	≤ 0.45 mA
Response time	≤ 250 ms for 1 sensor with open-circuit monitoring
Open-circuit monitoring	can be switched off
Short-circuit monitoring	can be switched off (value is adjustable)
Range	Parameterizable (see table "Digital measuring errors")
Min. measured span	10 °C (18 °F)
Characteristic	Temperature-linear or special characteristic
Resistance-based sensors
Measured variable	Actual resistance
Sensor type	Resistance-based, potentiometers
Units	Ω
Connection
Normal connection	1 resistance-based sensor (R) in 2-wire, 3-wire or 4-wire system
Generation of average value	2 resistance-based sensors in 2-wire system for generation of average value
Generation of difference	2 resistance thermometers in 2-wire system (R1 – R2 or R2 – R1)
Interface
Two-wire system	Parameterizable line resistance ≤ 100 Ω (loop resistance)
Three-wire system	No balancing required
Four-wire system	No balancing required
Sensor current	≤ 0.45 mA
Response time	≤ 250 ms for 1 sensor with open-circuit monitoring
Open-circuit monitoring	can be switched off
Short-circuit monitoring	can be switched off (value is adjustable)
Range	Parameterizable, max. 0 ... 2200 Ω (see Table "Digital measuring errors")
Min. measured span	5 Ω ... 25 Ω (see Table "Digital measuring errors")
Characteristic	Resistance-linear or special characteristic
Thermocouple elements
Measured variable	Temperature
Sensor type (thermocouples)
Type B	Pt30Rh-Pt6Rh to DIN IEC 584
Type C	W5%-Re to ASTM 988
Type D	W3%-Re to ASTM 988
Type E	NiCr-CuNi to DIN IEC 584
Type J	Fe-CuNi to DIN IEC 584
Type K	NiCr-Ni to DIN IEC 584
Type L	Fe-CuNi to DIN 43710
Type N	NiCrSi-NiSi to DIN IEC 584
Type R	Pt13Rh-Pt to DIN IEC 584
Type S	Pt10Rh-Pt to DIN IEC 584
Type T	Cu-CuNi to DIN IEC 584
Type U	Cu-CuNi to DIN 43710
Units	°C or °F
Connection
Standard connection	1 thermocouple (TC)
Generation of average value	2 thermocouples (TC)
Generation of difference	2 thermocouples (TC) TC1 – TC2 or TC2 – TC1
Response time	≤ 250 ms for 1 sensor with open-circuit monitoring
Open-circuit monitoring	can be switched off
Cold junction compensation
Internal	With integrated Pt100 resistance thermometer
External	With external Pt100 IEC 60571 (2-wire or 3-wire connection)
External fixed	Cold junction temperature can be set as fixed value
Range	Parameterizable (see table "Digital measuring errors")
Min. measured span	Min. 50 ... 199 °C (90 ... 180 °F) (see table "Digital measuring errors")
Characteristic	Temperature-linear or special characteristic
mV Sensor
Measured variable	DC voltage
Sensor type	DC voltage source (DC voltage source possible over an externally connected resistor)
Units	mV
Response time	≤ 250 ms for 1 sensor with open-circuit monitoring
Open-circuit monitoring	can be switched off
Short-circuit monitoring	can be switched off (value is adjustable)
Range	-10 ... 70 mV -100 1100 mV
Min. measured span	2 mV or 20 mV
Overload capacity of the input	-1.5 ... +3.5 V DC
Input resistance	≥ 1 MΩ
Characteristic	Voltage-linear or special characteristic
Output
Output signal	4 ... 20 mA, 2-wire With SITRANS TH300, additional communication acc. to HART Rev. 5.9
Power supply	11 ... 35 V DC (to 30 V with EEx)
Max. load	(U_aux – 11 V)/0.023 A
Overrange	3.6 ... 23 mA, continuously adjustable (default range: 3.84 mA ... 20.50 mA)
Error signal (e.g. in the event of sensor breakage)	3.6 ... 23 mA, continuously adjustable (default value: 22.8 mA)
Sample cycle	0.25 s nominal
Damping	Software filter 1st order 0 ... 30 s (parameterizable)
Protection	Against reversed polarity
Electrically isolated	Input against output (1 kV_eff)
Measuring accuracy
Digital measuring errors	See Table "Digital measuring errors"
Reference conditions
Power supply	24 V ± 1%
Load	500 Ω
Storage temperature	23 °C
Warming-up time	> 5 min
Error in the analog ouput (digital/analog converter)	< 0.1 % of span
Error due to internal cold junction	< 0.5 °C (0.9 °F)
Temperature effect	< 0.1% der max. span/10°C (18 °F)
Power supply effect	< 0.005% of span/V
Effect of load impedance	< 0.012% of span/100 Ω
Long-term drift
in the first month	< 0.02% of max. span
after one year	< 0.03% of max. span
after 5 years	< 0.04% of max. span
Rated conditions
Ambient temperature
Storage temperature	-40 ... +85 °C (-40 ... 185 °F)
Functional temperature	-40 ... +85 °C (-40 ... 185 °F)
Relative humidity	< 98%, with condensation
Electromagnetic compatibility	acc. to DIN EN 61326 and NE21
Construction
Material	Molded plastic
Approx. weight	50 g (0.11 lb)
Dimensions	See "Dimension drawings"
Cross-section of cables	Max. 2.5 mm² (AWG 13)
Degree of protection to EN 60529
Enclosure	IP40
Terminals	IP00
Certificate and approvals
Explosion protection ATEX
"Intrinsically-safe" type of protection	II 1G EEx ia IIC T6/T4 II 2(1)G EEx ia/ib IIC T6/T4
"Operating equipment that is non-ignitable and has limited energy" type of protection	II 3G EEx nAL IIC T6/T4
EC type test certificate	PTB 05 ATEX 2040X
Explosion protection to FM for USA and Canada (cFM_US)
FM approval	PID 3024169
Degree of protection	IS Cl I, II, III, Div 1, GP ABCDEFG T4/T5/T6 IS Cl I, ZN 0, 1 AEx ia IIC T4/T5/T6 NI Cl I, II, III, Div 2, GP ABCDFG T4/T5/T6 Cl I, ZN2, GP IIC T4/T5/T6
Software requirements for SIPROM T
PC operating system:	Windows ME, 2000 and XP; also Windows 95, 98 and 98 SE, but only in connection with RS 232 modem.

Factory setting:

Pt100 (IEC 751) with three-wire circuit
Measuring range: 0 ... 100 °C (32 ... 212 °F)
Fault current: 22.8 mA
Sensor offset: 0 °C (0 °F)
Damping 0.0 s

Digital measuring errors

Resistance thermometer

input	Range	Min. measured span		Digital accuracy
	°C (°F)	°C	(°F)	°C	(°F)
To IEC 60751
Pt25	-200 ... +850 (-328 ... +1562)	10	(18)	0.2	(0.36)
Pt50	-200 ... +850 (-328 ... +1562)	10	(18)	0.15	(0.27)
Pt100 ... Pt200	-200 ... +850 (-328 ... +1562)	10	(18)	0.1	(0.18)
Pt500	-200 ... +850 (-328 ... +1562)	10	(18)	0.15	(0.27)
Pt1000	-200 ... +350 (-328 ... +662)	10	(18)	0.15	(0.27)
to JIS C1604-81
Pt25	-200 ... +649 (-328 ... +1200)	10	(18)	0.2	(0.36)
Pt50	-200 ... +649 (-328 ... +1200)	10	(18)	0.15	(0.27)
Pt100 ... Pt200	-200 ... +649 (-328 ... +1200)	10	(18)	0.1	(0.18)
Pt500	-200 ... +649 (-328 ... +1200)	10	(18)	0.15	(0.27)
Pt1000	-200 ... +350 (-328 ... +662)	10	(18)	0.15	(0.27)
Ni 25 to Ni1000	-60 ... +250 (-76 ... +482)	10	(18)	0.1	(0.18)

Resistance-based sensors

Input	Range	Min. measured span	Digital accuracy
	Ω	Ω	Ω
Resistance	0 ... 390	5	0.05
Resistance	0 ... 2200	25	0.25

Thermocouple elements

input	Range		Min. measured span		Digital accuracy
	°C	(°F)	°C	(°F)	°C	(°F)
Type B	0 ... +1820	(32 ... 3308)	100	(180)	2	(5.4)
Type C (W5)	0 ... 2300	(32 ... 4172)	100	(180)	2	(3.6)
Type D (W3)	0 ... 2300	(32 ... 4172)	100	(180)	2	(3.6)
Type E	-200 ... +1000	(-328 ... +1832)	50	(90)	1	(1.8)
Type J	-210 ... +1200	(-346 ... +2192)	50	(90)	1	(1.8)
Type K	-230 ... +1370	(-382 ... +2498)	50	(90)	1	(1.8)
Type L	-200 ... +900	(-328 ... +1652)	50	(90)	1	(1.8)
Type N	-200 ... +1300	(-328 ... +2372)	50	(90)	1	(1.8)
Type R	-50 ... +1760	(-58 ... +3200)	100	(180)	2	(3.6)
Type S	-50 ... +1760	(-58 ... +3200)	100	(180)	2	(3.6)
Type T	-200 ... +400	(-328 ... +752)	40	(72)	1	(1.8)
Type U	-200 ... +600	(-328 ... +1112)	50	(90)	2	(3.6)

mV Sensor

input	Range	Min. measured span	Digital accuracy
	mV	mV	μV
mV Sensor	-10 ... +70	2	40
mV Sensor	-100 ... +1100	20	400

The digital accuracy is the accuracy after the analog/digital conversion including linearization and calculation of the measured value.

An additional error is generated in the output current 4 to 20 mA as a result of the digital/analog conversion of 0.1% of the set span (digital-analog error).

The total error under reference conditions at the analog output is the sum from the digital error and the digital-analog error (poss. with the addition of cold junction errors in the case of thermocouple measurements).